28
Assembly manual FS2 EI60/120 Version 11, jan.. 2021
-
After the limit switches of the tube motor have been adjusted, perform a functional test of the fire
screen to check the operation.
-
Reinstall the front and side fascia covers.
Installation of the fascia gaskets
-
The fascia gaskets are delivered trimmed to the size of the guide rails and pre-installed with clips. Drill
Ø4.2 mm holes in the gaskets at the clip hole locations. Do this by peeling away the widest tongue of the
gasket. Secure the clips with Ø4 x 14 mm rivets. Verify there are no evident bulges on the fascia gasket.
Rivet installed over
the clips
Image Installation of the fascia gaskets with rivets
Fascia gasket
Image Cross-sectional view of a guide rail with the fascia gaskets secured with riveted clips
