16
Assembly manual FS2 EI60/120 Version 11, jan.. 2021
-
Remove the bearing from the bracket.
-
Install the bearing on the non-driven end of the shaft.
-
Place the shaft with the wound curtain and the motor in the motor mount bolted to the bracket. With
the motor in the mount, slide the other end of the shaft with the curtain,
complete with the bearing,
onto the bracket and bolt the bearing to the bracket with 4
bolts.
.
-
Check the length of the counterweight
profile (it should be So+25 mm).
-
Insert the counterweight profile into the
pocket of the curtain.
Before installing the shaft with the motor
After the installation
Image installation of the motor
Counterweight profile
Image counterweight profile in curtain
