14
Assembly manual FS2 EI60/120 Version 11, jan.. 2021
-
B Bolt down the retaining angle braces to the brackets with the M6 countersunk bolts. The
angle braces are the reference for the correct orientation of the guide rail channel bars.
With the shaft box brackets and the channel bars installed, the angle braces can be released
temporarily to facilitate access to the winding shaft installation.
-
Fasten the middle brackets (part A) and the top fascia cover with rivets to the bolted-down brackets
with the square tubes. If one middle bracket is planned, install it in the centre. If more middle
brackets are planned, install them spaced evenly.
Image middle cover bracket
-
Fasten the cover box BA by drilling holes in line with the brackets..
Image guide on corner bracket
Retaining
angle brace
Alignment of the guide
rail channel bars with
the shaft box
components
the retaining angle bar
face touches the guide
rail channel bar ledge
Middle bracket part A
Middle bracket part B
