27
Assembly manual FS2 EI60/120 Version 11, jan.. 2021
-
With the guide rail internal parts installed (as shown on page 20) , install the Promat fire-proof panels
and the outer fascia. Leave 2 mm of play for the fascia gaskets.
-
With the guide rails installed, insert the counterweight into the curtain pocket.
-
Insert the curtain into the recesses in the guide rails so that the running shoes are in separate channels..
-
Unwind the curtain, adjust the component for correct alignment, and replace the fascia
covers as shown in Image Installation of Promat fire-proof panels in the back of the shaft box page 26
16. Adjusting the tubular motors and testing screen plus mounting guide.
Connect the tubular motor to an adjustment cable. wire no. 1
= zero and 2 and 3 up and down, connect the wire 4 and 5 to
the 24V in MO710 controlbox and put the power on this, this
is to hold the brake. Send the screen down gently, if
necessary help the first time. Adjust the motor down and up
with the two adjusting screws on the motor. Pay attention to
the direction of rotation of the shaft.
See also the manual of the tubular motor supplier.
Image Cross-sectional view of the guide rail engaged by the curtain for the corridor-closure installation
Curtain
Running shoe
2mm
Warning – Mortal danger due to electrical current!
•
Disconnect power from the cables and check if they are voltage-free.
•
Observe the applicable regulations and standards.
•
Carry out the electrical connection professionally.
•
Use suitable tools.
