25
Assembly manual FS2 EI60/120 Version 11, jan.. 2021
15. Corridor-closure installation
-
Verify the dimensions of the wall opening and the plane to which the door shaft box will be installed
(level out to the same plane with washers if required).
-
The fire screen curtain door sizes So = 4000 mm and smaller are delivered completely preassembled.
Install the curtain door complete without removing of the curtain winding shaft with the drive unit or the
retaining slat. From the complete door assembly, remove the top fascia cover and the side fascia covers
(as shown in image page 21).
-
Align the locations of the bracket with the door installation location. Align the brackets in reverse to the
direction required for a wall-mounted installation..
Image Corridor-closure installation conditions for a fire safety curtain door
Corridor-closure installation of the shaft box brackets
Location of anchors on the ceiling
The recommended installation gap is 5mm
between the brackets and the wall
