
31
●
IPv4 Address Configure
• DHCP: If this option is checked, the unit will automatically obtain an available dynamic IP address from the DHCP server each
time it connects to a LAN network environment.
• IP4 Address: Manually input IP address when DHCP is checked off.
• Subnet Mask: Please use default number: 255.255.255.0. If the subnet mask is not properly configured, the unit may not be
able to communicate with other devices on the network.
• Default Gateway: Leave blank as the default settings. No Default Gateway address required if not used. Ask your network
administrator for further information.
• Primary DNS: Leave blank as the default settings. No Default Primary DNS address required if not used. Ask your network
administrator for further information.
• Secondary DNS: Leave blank as the default settings. No Default Secondary DNS address required if not used. Ask your
network administrator for further information.
●
IPv6 Address Configure
• IPv6 Enable: Check the box to enable IPv6 protocol.
• Accept IPv6 router advertisements: Check the box to activate RA (Router Advertisement) corresponding to RS (Router
Solicitation) for IPv6 address designation.
• Enable DHCPv6: If enabled, the camera will automatically obtain an available dynamic IP address under IPv6 protocol from
the DHCP server each time it connects to the LAN.
• IPv6 Address: To manually set an IP address under IPv6 protocol.
• Subnet prefix length: Set prefix length for subnet ranging from 1 – 128.
• IPv6 default router address: To manually set a default router address under IPv6 protocol.
• Subnet prefix length: Set prefix length for subnet ranging from 1 – 128.
• Pv6 DNS: Set a DNS (Domain Name Server) under IPv6 protocol.
●
UPnP
• When set to “ON”, the camera can be detected automatically by any computer in the LAN to skip the installation of the IP
Finder utility.
●
Bonjou
r
• It’s a specific protocol introduced by Apple Inc. to make IP devices including IP cameras easily found by software like Safari
within local network on the basis of zero configuration.
●
OSD Enable
• Mode: 2 options below for users to enable OSD function.
»
Camera Name: Select it to display users’ defined camera name on live view screen.
»
Text: Choose it and input desired text in the side field to be displayed on live view.
• Date & Time: By selecting “ON” to show date & time info on live view screen.
Note
Please click the “Save” button to make settings take effect.