
9
2.2.4 Installing Desiccant
In order to prevent condensation from forming within the camera body, the included desiccant pack is provided for user to
manually install prior to commencing to operate the camera. First hold the desiccant pack upright with one hand and unfold
the desiccant slot with the other hand followed by putting the desiccant vertically into the slot in place. The properly held
desiccant can offer the required function accordingly.
Desiccant Slot
Desiccant
Figure 2 - 4: Desiccant Installation
2.2.5 Assembling Camera
After both desiccant and Micro SD card installations, connect the lanyard that goes along with camera body to the top cover
via fastening with the exact screw highlighted red below. Assemble the top cover back to the camera body and tighten the 4
top cover screws to complete assembling procedure.
Figure 2 - 5: Lanyard Connection