
11
2.2.7 Connecting Safety Cord
Connect the attached safety cord with one end to the mounting surface and the other end to the safety-cord screw of the
camera. Depending on different applications, please connect the safety cord to the corresponding safety-cord screw on
varied surfaces as the following figures illustrating.
Figure 2 - 7: Safety-cord screw for flush mount
Warning
Depending on the mounting surface, you may require different screws and anchors. To prevent the
camera from falling off accidentally, ensure that the cord is connected to a firm place strong enough to
withstand the total weight of the whole set of the camera.
2.2.8 Before Powering Camera
Use soft, lint -free cloth to wipe the top cover and remove fingerprints. Properly check if every screw is well fastened and if
camera is firmly installed within the mounting area. Power on the camera via suitable power source and refer to the later
chapter for detailed web access procedure.