manualshive.com logo in svg

MERRICK MC3 90.10.EX, Руководство по эксплуатации и техническому обслуживанию

Поделиться
Скачать
MERRICK MC3 90.10.EX Скачать руководство пользователя страница 19

 

MC³ 90.10.EX O&M Manual  

 

- 12 -  

Faults 

 

The Fault button is used to indicate an error has occurred.  A Fault condition will stop all feeders.  
The system will not restart until the Fault condition has been cleared.  A Fault will also prevent the 
system from starting. Up to 16 Logical Inputs and Outputs may be selected to give you a Fault 
indication.   

This button will remain displayed until the conditions that caused the Fault have been removed 

and the Fault acknowledged.  To view the Fault screen, touch 

.  There is an active indicator 

to the left of the text (

 = ON 

 = OFF).  Any Fault that occurs will be saved until acknowledged 

by you and will be displayed with a 

 to the left of the active indicator.  If there are no Faults, this 

button will be hidden from the main screens.  You may still access this screen from the action 
menu.  

Use 

 and 

 to move the selection box to the Fault you want to acknowledge.  

 

is used to acknowledge a Fault selected by the selection box.  

 is used to acknowledge 

all Faults.  If the error that caused an indication has not been corrected the Fault button will 
continue to be displayed on the main screens and the Fault will continue to be indicated on this 
screen.   

Warnings 

 

The Warning button is used to indicate a problem has occurred.  Up to 16 Logical Inputs and 
Outputs may be selected to give you a warning indication.  A Warning condition will not stop the 
system. 

This button will remain displayed until the conditions that caused the Warning have been 

removed and the Warning acknowledged.  To view the Warning screen, touch 

.  There is an 

active indicator to the left of the text (

 = ON   = OFF).  Any Warning that occurs will be saved 

until acknowledged by you and will be displayed with a 

 to the left of the active indicator.  If 

there are no Warnings, this button will be hidden from the main screens.  You may still access 
this screen from the action menu.  

Use 

 and 

 to move the selection box to the Warning you want to acknowledge.  

 is used to acknowledge a Warning selected by the selection box.  

 is used to 

acknowledge all Warnings.  If the problem that caused an indication has not been corrected the 

Содержание MC3 90.10.EX




























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды