manualshive.com logo in svg

MERRICK MC3 90.10.EX, Руководство по эксплуатации и техническому обслуживанию

Поделиться
Скачать
MERRICK MC3 90.10.EX Скачать руководство пользователя страница 14

 

MC³ 90.10.EX O&M Manual  

 

- 7 -  

The BPAC card has four AC inputs and 8 Relay outputs.  The relays 1-7 are N/O types with relay 
8 having the capability of being selected to N/O or N/C.  

Up to four Back plane boards may be connected to the MC³ Controller when two (2) PCIO boards 
are in the card stack assembly.  

Card Stack Assembly 

The Card Stack assembly consists of one (1) CPU Board, one (1) FastComm 422/4-104 
Communication Board, one (1) or two (2) PCIO boards and one (1) LTI board.  The Card Stack 
Assembly in the panel mount enclosure is mounted to the slide tray. The slide tray is kept in place 
by a pair of guides that are mounted on the enclosure and with catch screws on the back of the 
enclosure.  In the wall mount enclosure, the Card Stack Assembly is securely attached to the 
mounting plate.  All boards are connected electronically by way of an industry standard PC-104 
interface bus.  

Fastcom 422/4-104 

The Fastcom 422/4-104 is a 4-port RS-422  serial communication board.  All feeders to be 
controlled by the 90.10.EX software must be attached to one of ports on this board.  

CPU Board 

The CPU Board contains the Intel 386EX Microprocessor and associated support circuitry for a 
bus interface, serial interface and memory support.  The newest CPU module includes both 
available communication ports providing RS-232 and RS422/485 from both ports.  The CPU 
board is the bottom board of the card stack. 

The RS-485 Serial Communications port is a feature that provides the circuitry necessary for the 
MC³ Controller to communicate with other serial devices such as a SuperBridge or Personal 
Computer.  For more information regarding MC³, Serial Communications see the Merrick 
Communications Specification Manual.  This specification lists some hardware options and 
interconnection examples and describes the Merrick Communications Protocol in detail. 

PCIO Board 

The PCIO Board provides the circuitry for two (2) isolated analog outputs; one (1) isolated analog 
input, sixteen (16) digital outputs and eight (8) digital inputs.  An additional PCIO Board is 
available as an option giving the controller a capability of having four (4) isolated Analog Outputs, 
two (2) isolated Analog Inputs, thirty-two (32) Digital outputs and sixteen (16) Digital inputs.  Two 
(2) racks of digital inputs and outputs can be connected to the PCIO board.  

LTI Board 

The LTI Board contains the circuitry required to process incoming synchronization pulses, outputs 
for an AC and DC Electromechanical Totalizer (EMT) and an interface to the Display assembly.  

Power Supply Assembly 

The power supply is mounted on the front of the slide tray on the panel mount enclosure.  On the 
wall mount enclosure, the power supply is mounted under a protective metal panel.  The power 
supply for the door mount is normally attached to the cabinet away from the controller. 

Display Assembly 

The Display Assembly consists of a Touch Keypad, LCD Board and LCD Display. 

LCD Board 

This board is used to interface the LCD Display and the Touch Keypad to the LTI Board and 
provides the proper voltage for the backlight of the LCD Display.  There is a potentiometer for 
adjusting the contrast of the LCD Display.  In addition, on specific LCD Boards containing an 
LS220 type inverter there is a Brightness Adjust potentiometer.  

LCD Display 

The LCD Display is a 240 horizontal by 128 vertical pixel resolution monochrome graphical 
display.  The display works in conjunction with the Touch Screen to provide a Graphical User 
Interface (GUI).  

Содержание MC3 90.10.EX




























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды