Merkür
41
Limit Switch OFF (Motor full OFF)
Input Alarm (In the case of an interruption of the input signal in the
analog-operated SSM-6 motors, the motor rotates in the OFF direction and
generates contact output.
Low limit setting (The motor is running below the minimum limit value
(0°).
High Limit Alarm. (The motor is running above the maximum limit value
(90°).
Communication Error (Communication Alarm) SSM-6 Dry contact output in
case the MODBUS Line is interrupted.
Digital input functions -This function is only enabled in analog motors.
1. Digital input (If there is a selected angle value under this menu, the
motor will move towards the angle you have set, if there is a signal to
motor’s connector terminal number: 3.)
Enabled for analog motors.
2. Digital input (If there is a selected angle value under this menu, the
motor will move towards the angle you have set, if there is a signal to
motor’s connector terminal number: 4.)
Enabled for analog motors.
Analog configuration (Input - Output Settings Menu)
Analog input configuration
Control Input Type (Analog Input) 4-20 mA.
- DO1.FUN-
LSC
- DO1.FUN-
INP.ALM
- DO1.FUN-
P.LL.ALM
- DO1.FUN-
P.HH.ALM
- DO1.FUN
COMM.ALM
-SETTIN-
DI.FUNCT
- DI.DEG -
DI1.DEG
- DI.DEG -
DI2.DEG
- SETTIN -
ANA.CONF
- AN.CON -
AI.CONF
- AI.TYP -
4 - 20 mA
