29
Menu for analog output limitation in SSM-6 Motors :
Figure 26:
FULL and LIMITED Setting menu for analog output
SSM-6 Analog Configuration :
Input types can be configured differently in SSM-6 Motors operating in analog mode.
Example:
A motor whose control input is mA can be changed to 0-10 V or 2-10 volt. If
there is an
analog output module
on the motor, the output type can be set to volt. Likewise, an
input in Volt can be set to mA for output.
To change the input or output type of the SSM-6 motor, the motor should first be deenergized, and
then the position of the bottom switches should be changed for the desired control. (
See Figures
22 and 23
for bottom switch positions) Afterwards, the analog operating system of the SSM-6 can
be changed following the “ANALOG CONFIGURATION” menus shown in
Figures 27
and
28
.