11
Technical Information for SSM-6 Servomotors :
Mode of Operation
: Programmable Electronic Servomotor
Servo motor type
:
A
- ON/OFF
C
– ANALOG
B
- TPSC
D
- MODBUS
Standard Control Signal
: (0) 4–20 mA. (250 Ohm.), (0) 2-10 VDC.
Communication system
: Modbus Operating (9600–19200-57600-115200 Boud )
Double register format FP L - Little Endian
(1,2,3,4) Read Code (hex=64, Decimal=100
Register data type: unsigned 16
Communication system: (
Option
) * : Bluetooth (2.4 Ghz. Communication frequency
)
Low operating voltage
: 24 Volt AC. / DC. ± %5 Volt. 320 mA.
High operating voltage: (
Option
) * : 100-240 VAC. 50/60 Hz. 7 VA.
Duty Cycle
: 100 %
Motor’s Direction of Rotation
: CW or CCW (When observed from the motor’s shaft)
Angle of rotation
: 0-90°
Position Error
: ± 0.25°
Motor setting range
: At 1° increments
External casing
: 3 layers electrostatic painted aluminum
Drive shaft
: AISI 304 (Stainless Steel)
Position indicator
: Electronic (1.6 inch liquid crystal blue display)
External switch
: 2 programmable relay ignition 1 Amp. Max.
Rotation time
: 30 seconds 90°
Operating Torque
: 30 seconds 90° =20 Nm. 60 seconds 90°= Max. 40 Nm.
Feedback signal : 1 (
Option
) *
: (0) 4–20 mA. (0) 2-10 VDC. Galvanic isolation Feedback
signal : 2 (
Option
) *
: 1K.... 5 K. Linear potentiometer
Protection class
: IP 65
Analog filtering
: Between 0 and 5 seconds
Position of installation
: Horizontal/Vertical
Cable connection terminal
: 16 x 1.5
Motor limit control
: Micro Electronic limitation
Weight (without packaging)
: 3.5 Kg.
Operable ambient temperature
: -10 to +60°C
*
The modules included in the options can operate in all SSM-6 motor models. The
desired models should be specified in the initial order.
