17
Operating system of SSM-6 motors:
A
- ON/OFF
B
- TPSC
C
– ANALOG
D
- MODBUS
A
- ON/OFF OPERATING SYSTEM :
Aside from the constant power supplied
to the servo motor, the motor moves in the direction of the ON position, towards the far end of
the ON position angle, as long as power is supplied from the control input. When deenergized, the
motor will turn back to the closing position
. (This can be adjusted to any angle between 0°and 90°.)
The ON-OFF operation connection of the servo motor should be made as shown
in Figure 12.
24 VAC or 24 VDC voltage is supplied to terminals
17 and 18
. When terminals 3
and 5 are combined with a contact, the motor moves in the opening direction, and when the
contact is made, it moves in the closing direction.
Do not apply any voltage to
terminals 3 and 5 of the ON-OFF
servomotors! Run according to the
connection diagram in
Figure 9
!
Figure 9 :
ON-OFF control connection
Motion graph in ON-OFF controlled servo motors
WARNING
