Page 8 of 20
Installing the Booster Kit (Optional)
The booster kit is composed of a pump and
a pump extension.
To insert the pump extension between the pump
and the pump holder:
1. Remove the tube from the pump.
2. Remove the pump by pressing the tab and turning
it at the same time in the direction of the arrow.
3. Release the pump.
6. Ensure that the rollers of the main pump and
pump extension are not aligned. They should
be staggered in relation to each other:
4. Clip the pump extension on the pump.
5. Open the 2 covers.
If the alignment is incorrect, separate the pump
from the pump extension by pushing the tab.
Move the roller wheel slightly to the side and clip
the pump and the pump extension together again.
7. Replace the booster kit on the pump holder.
To assemble the tubing for the booster kit, remove
the pump tubing from the current assembly and
replace it with the double tubing supplied with
the booster kit.
Correct alignment
Incorrect alignment
