KEYLESS-GO start function
General notes
Bear in mind that the engine can be started by
any of the vehicle occupants if there is a Smart-
Key in the vehicle (
Y
page 147).
Changing the settings of the locking
system
You can change the settings of the locking sys-
tem. This means that only the driver's door and
the fuel filler flap are unlocked when the vehicle
is unlocked. This is useful if you frequently travel
on your own.
X
To change the setting: press and hold down
the
%
and
&
buttons simultaneously
for approximately six seconds until the bat-
tery check lamp (
Y
page 80) flashes twice.
If the setting of the locking system is changed
within the signal range of the vehicle, pressing
the
&
or
%
button:
R
locks or
R
unlocks the vehicle
The SmartKey now functions as follows:
X
To unlock: press the
%
button once.
X
To unlock centrally: press the
%
button
twice.
X
To lock: press the
&
button.
The KEYLESS-GO functions can be changed as
follows:
X
To unlock the driver's door: touch the inner
surface of the door handle on the driver's
door.
X
To unlock centrally: touch the inner surface
of the door handle on the front-passenger
door or the rear door.
X
To lock centrally: touch the outer sensor
surface on one of the door handles.
X
To restore the factory settings: press and
hold the
%
and
&
buttons simultane-
ously for approximately six seconds until the
battery check lamp (
Y
page 80) flashes
twice.
Mechanical key
General notes
If the vehicle can no longer be locked or
unlocked with the SmartKey or KEYLESS-GO,
use the mechanical key.
If you use the mechanical key to unlock and
open the driver's door, the anti-theft alarm sys-
tem will be triggered. Switch off the alarm
(
Y
page 76).
If you unlock the vehicle using the mechanical
key, the fuel filler flap will not be unlocked auto-
matically.
X
To unlock the fuel filler flap: insert the
SmartKey into the ignition lock.
Removing the mechanical key
X
Push release catch
:
in the direction of the
arrow and at the same time remove mechan-
ical key
;
from the SmartKey.
For further information about:
R
Locking/unlocking the driver's door
(
Y
page 84)
R
Unlocking the trunk (
Y
page 90)
Inserting the mechanical key
X
Push mechanical key
;
completely into the
SmartKey until it engages and release
catch
:
is back in its basic position.
SmartKey
79
Opening
and
closing
Z
