Selecting the front-passenger seat and rear-
compartment seat
X
Press the
v
button repeatedly until the
indicator lamp in the button is not lit.
The rear-compartment seat is selected if the
indicator lamp in the button is not lit.
X
Adjust the rear seat accordingly
(
Y
page 102).
X
Press the
v
button repeatedly until the
indicator lamp in the button lights up.
The front-passenger seat is selected if the
indicator lamp in the button lights up.
X
Adjust the front-passenger seat accordingly
(
Y
page 104).
X
Press memory button M and one of the stor-
age position buttons 1, 2 or 3 within three
seconds.
The settings are stored in the selected stor-
age position.
Vehicles with a rear reclining seat
The power supply or the ignition must be
switched on so that the front-passenger seat
can be selected (
Y
page 146).
Selects rear-compartment seat
X
Press the
v
button repeatedly until the
indicator lamp in the button is not lit.
The rear-compartment seat is selected if the
indicator lamp in the button is not lit.
X
Adjust the rear seat accordingly
(
Y
page 102).
X
Press the M memory button and then press
either the 1 or 2 memory button within three
seconds.
The settings are stored in the selected stor-
age position.
Selecting the front-passenger seat and rear-
compartment seat
X
Press the
v
button repeatedly until the
indicator lamp in the button is not lit.
The rear-compartment seat is selected if the
indicator lamp in the button is not lit.
X
Adjust the rear seat accordingly
(
Y
page 102).
X
Press the
v
button repeatedly until the
indicator lamp in the button lights up.
The front-passenger seat is selected if the
indicator lamp in the button lights up.
X
Adjust the front-passenger seat accordingly
(
Y
page 104).
X
Press the M memory button and then press
either the 1 or 2 memory button within three
seconds.
The settings are stored in the selected stor-
age position.
You cannot store any settings on the button for
setting the reclined position.
Calling up a stored setting
General notes
The memory positions in the area for the chauf-
feur mode can only be set when the conditions
for the chauffeur mode are fulfilled
(
Y
page 106).
Vehicles without rear reclining seat
The power supply or the ignition must be
switched on so that the front-passenger seat
can be selected (
Y
page 146).
X
To call up the stored rear seat setting:
press the
v
button repeatedly until the
indicator lamp in the button is not lit.
X
To call up the stored front-passenger seat
and rear seat settings: press the
v
but-
ton repeatedly until the indicator lamp in the
button lights up.
X
Press and hold the relevant storage position
button 1, 2 or 3 until the rear seat or the front-
passenger seat are in the stored position.
i
Seat adjustment is interrupted as soon as
you release the storage position button. The
adjustment of the active multicontour seat is
still carried out.
122
Memory function in the rear compartment
Seats,
steering
wheel
and
mirrors
