lamps to flash four short pulses at a pedestrian
detected on or near to the road.
X
In the light menu, select the spotlight function
of Night View Assist Plus (
Y
page 225).
The spotlight function does not flash at animals.
Display in the assistance graphic
X
To display the assistance graphic:select
the
Assistance Graphic
menu using the on-
board computer (
Y
page 221).
Pedestrian symbol
:
in the assistance
graphic indicates the status of the spotlight
function. If the symbol is displayed not filled
in, the function is switched on. If the symbol is
displayed filled in, the conditions for the spot-
light function are met.
Problems with Night View Assist Plus
Problem
Possible causes/consequences and
M
Solutions
The picture quality of
Night View Assist Plus
has deteriorated.
The windshield is fogged up on the inside.
X
Fold down camera cover (
Y
page 324).
X
Defrost the windshield (
Y
page 139).
The windshield is iced up.
X
De-ice the windshield (
Y
page 139).
The windshield wipers are smearing the windshield.
X
Replace the wiper blades (
Y
page 129).
The windshield is smeared after the vehicle has been cleaned in a car
wash.
X
Clean the windshield (
Y
page 322).
There is windshield chip damage in the camera's field of vision.
X
Replace the windshield.
The pedestrian and ani-
mal recognition is not
available.
the infrared camera in the radiator trim is dirty
X
Use a soft cloth and water to clean the infrared camera.
Driving systems
203
Dr
iving
and
par
king
Z
