X
To open: open the stowage compartment
(
Y
page 282).
X
Open the protective flap if necessary.
X
To remove: slide catch
:
forwards and pull
the cup holder upwards.
X
To insert: make sure that the protective flap
is closed.
X
Insert the cup holder and slide catch
:
back.
You can remove the cup holder and the rubber
mat for cleaning. Clean them with clean, luke-
warm water only.
Cup holder in the rear seat armrest
Vehicles with a rear bench seat
!
Close the cup holder before folding the rear
seat armrest up. Otherwise, the cup holder
could be damaged.
X
Fold down the rear seat armrest.
X
To open: press the front of cup holder
:
or
;
.
Cup holder
:
or
;
extends automatically.
X
To fold out: place a container in the cup
holder.
The cup holder folds down automatically.
X
To fold in: remove the container.
The cup holder folds in automatically.
X
To close: slide cup holder
:
or
;
back until
it engages.
Vehicles with electrically adjustable rear
bench seats
X
Fold down the rear seat armrest.
X
To open: press down base
;
of the cup
holder in the middle until it engages.
X
To close: press closing button
:
.
Base
;
of cup holder pops up.
The cup holder insert can be removed for clean-
ing. Clean with clear, lukewarm water only.
!
Do not pull out the cup holder insert any
further than 0.6 in (15 mm). Otherwise, the
wooden trim on the rear seat armrest could be
damaged.
X
To remove the insert: press down base
=
of
the cup holder in the middle until it engages.
X
Press both retaining clips
;
and pull the cup
holder insert upwards approximately 0.6 in
(15 mm).
X
Press button
:
.
Base
=
of cup holder pops up.
X
Remove the insert from the rear seat armrest
completely.
!
Make sure that the cup holder insert has
been inserted into the recess correctly. Oth-
erwise, the wooden trim on the rear seat arm-
rest could be damaged.
Features
291
Sto
w
ag
e
an
d
features
Z
