Control panel in the grab handle (rear
compartment)
Switching on, on the corresponding vehicle side:
X
Press button
;
.
Reading lamp
:
and the make-up lamp light
up.
Switching off, on the corresponding vehicle
side:
X
Press button
;
once.
The make-up lamp goes out.
X
Press button
;
twice.
Reading lamp
:
goes out.
Switching on, on both vehicle sides:
X
Press button
=
.
The reading lamps
:
and the make-up lamps
go on.
Switching off, on both vehicle sides:
X
Press button
=
.
Reading lamps
:
and the make-up lamps go
out.
Interior lighting control
General notes
In order to prevent the vehicle's battery from
discharging, the interior lighting functions are
automatically deactivated after some time
except for when the SmartKey is in position 2 in
the ignition lock.
The color, brightness, zone and display light for
the ambient lighting are set using the multime-
dia system; see the Digital Operator's Manual.
The interior lighting control can be operated
using the front overhead control panel.
Automatic interior lighting control
X
To switch on or off: press the
|
button.
When the automatic interior lighting control is
activated, the button is flush with the over-
head control panel.
The interior lighting automatically switches on if
you:
R
unlock the vehicle
R
open a door
R
remove the SmartKey from the ignition lock
The interior light is activated for a short while
when the SmartKey is removed from the ignition
lock. This delayed switch-off can be adjusted via
the multimedia system (see Digital Operator's
Manual).
Manual interior lighting control
X
To switch the front interior lighting on or
off: press the
c
button.
X
To switch the rear compartment interior
lighting on/off: press the
u
button.
X
To switch the reading lamp on or off: press
the
p
button.
Replacing bulbs
The front and rear light clusters of your vehicle
are equipped with LED light bulbs. Do not
replace the LED light sources of your vehicle
yourself. Contact a qualified specialist work-
shop which has the necessary specialist knowl-
edge and tools to carry out the work required.
Lamps are an important aspect of vehicle safety.
You must therefore make sure that these func-
tion correctly at all times. Have the headlamp
setting checked regularly.
Windshield wipers
Switching the windshield wipers
on/off
!
Do not operate the windshield wipers when
the windshield is dry, as this could damage
the wiper blades. Moreover, dust that has col-
lected on the windshield can scratch the glass
if wiping takes place when the windshield is
dry.
128
Windshield wipers
Lights
and
wind
shield
wip
er
s
