Resetting the rear sunblind
X
Turn the SmartKey to position 1 or 2 in the
ignition lock.
X
Pull switch
:
repeatedly until the rear roller
sunblind is fully closed.
X
Keep switch
:
pulled for an additional sec-
ond.
X
Make sure that the rear roller sunblind can be
opened fully again.
X
If this is not the case, repeat the steps above
again.
Problems with the sliding sunroof
G
WARNING
If you close the sliding sunroof again immediately after it has been blocked or reset, the sliding
sunroof closes with increased or maximum force. The reversing feature is then not active. Parts
of the body could be trapped in the closing area in the process. This poses an increased risk of
injury or even fatal injury.
Make sure that no parts of the body are in the closing area.
If somebody becomes trapped:
R
release the switch immediately, or
R
press the switch in any direction during the automatic closing process
The closing process is stopped.
!
If the sliding sunroof still cannot be opened or closed as a result of a malfunction, contact a
qualified specialist workshop.
Problem
Possible causes/consequences and
M
Solutions
The sliding sunroof can-
not be closed and you
cannot see the cause.
If the sliding sunroof is obstructed during closing and reopens again
slightly:
X
Immediately after it blocks, pull the
3
switch down again to the
point of resistance until the sliding sunroof is closed.
The sliding sunroof is closed with increased force.
If the sliding sunroof is obstructed again during closing and then
reopens slightly:
X
Immediately after it blocks, pull the
3
switch down again to the
point of resistance until the sliding sunroof is closed.
The sliding sunroof is closed without the automatic reversing fea-
ture.
Panorama roof with power tilt/sliding panel
99
Opening
an
d
cl
os
ing
Z