required. Mercedes-Benz recommends that
you use a Mercedes-Benz Service Centre for
this purpose. In particular, work relevant to
safety or on safety-related systems must be
carried out at a qualified specialist workshop.
X
If the tyre pressure is still at least 1.3 bar,
correct it (see fuel filler flap for values).
To increase the tyre pressure: switch on
the electric air pump.
To reduce the tyre pressure: open pres-
sure release screw
F
on pressure
gauge
G
.
X
Drive to the nearest workshop and have the
tyre changed there.
X
Have the TIREFIT kit replaced as soon as
possible at a qualified specialist workshop,
e.g. at a Mercedes-Benz Service Centre.
G
Risk of accident
Do not exceed the maximum speed of
80 km/h.
The "max. 80 km/h" label must be affixed in
the driver's field of vision.
The vehicle's handling characteristics may be
affected.
H
Environmental note
Have the used TIREFIT kit disposed of profes-
sionally, e.g. at a Mercedes-Benz Service
Centre.
X
Have the TIREFIT kit replaced every four
years at a qualified specialist workshop,
e.g. a Mercedes-Benz Service Centre.
Version 2
X
Pull connector
?
and air pump hose
A
from the housing.
X
Screw air pump hose
A
onto flange
B
of
TIREFIT sealant filler bottle
:
.
X
Place TIREFIT sealant filler bottle
:
head
downwards into recess
;
of the electric
air pump.
X
Remove the cap from valve
C
on the faulty
tyre.
X
Screw filler hose
D
onto valve
C
.
X
Insert plug
?
into the socket of the ciga-
rette lighter* (
Y
page 138) or into a 12 V
power socket in your vehicle
(
Y
page 139).
X
Turn the key to position 2 (
Y
page 61) in
the ignition lock.
Flat tyre
225
Practic
al
advice
* optional
X204_AKB; 1; 5, en-GB
wobuchh,
Version: 2.11.4
2008-10-15T13:20:56+02:00 - Seite 225
Z
Dateiname: 6515_0671_02_buchblock.pdf;
preflight
