X
Version 1: open flap
1
.
X
Version 1: pull connector
3
and air hose
4
out of the housing.
X
Version 2: pull connector
3
and the air
hose out of the housing.
X
Version 1: make sure that pressure
release screw
4
on the pressure gauge is
fully closed.
X
Remove the cap from the valve on the tyre.
X
Screw union nut
5
on the air hose onto the
valve.
X
Make sure on/off switch
2
of the electric
air pump is set to 0.
X
Insert plug
3
into the cigarette lighter
socket* (
Y
page 138) or into a 12 V socket
in your vehicle (
Y
page 139).
X
Make sure that the key is in posi-
tion 2 (
Y
page 61) in the ignition lock.
X
Press on/off switch
2
on the electric air
pump to I.
The electric air pump is switched on. The
tyre is inflated.
X
When a tyre pressure of 2.8 bar is reached,
press on/off switch
2
on the electric air
pump to 0.
The electric air pump is switched off.
!
Do not operate the electric air pump for
longer than eight minutes at a time without
a break. Otherwise, it may overheat.
The air pump can be operated again once
it has cooled down.
If the tyre pressure is higher than 2.8 bar:
X
Version 1: open pressure release
screw
4
on the pressure gauge until the
tyre pressure is correct.
X
Version 2: press pressure release button
6
until the tyre pressure is correct.
X
Switch off the electric air pump at on/off
switch
2
, disconnect from the tyre valve
and stow away.
Lowering the vehicle
X
Place the ratchet ring spanner onto the
hexagon nut of the jack so that the letters
AB are visible.
X
Lower the vehicle by turning the ratchet
ring spanner until the vehicle is once again
standing firmly on the ground.
X
Place the jack to one side.
X
Tighten the wheel bolts evenly in a cross-
wise pattern in the sequence indica-
ted (
1
to
5
). The tightening torque is
150 Nm.
G
Risk of accident
Have the tightening torque checked immedi-
ately after a wheel is changed. The wheels
could work loose if they are not tightened to
a torque of 150 Nm.
X
Turn the jack back to its initial position and
stow it and the rest of the vehicle tool kit in
the luggage compartment.
X
Transport the faulty wheel in the boot.
i
Do not activate the tyre pressure moni-
tor* until the deflated tyre has been
removed from the vehicle.
Flat tyre
231
Prac
tic
al
advi
ce
* optional
X204_AKB; 1; 5, en-GB
wobuchh,
Version: 2.11.4
2008-10-15T13:20:56+02:00 - Seite 231
Z
Dateiname: 6515_0671_02_buchblock.pdf;
preflight
