correct fuse rating for the systems con-
cerned. Do not attempt to repair or bridge
faulty fuses. Otherwise, a circuit overload
could cause a fire. Have the cause traced and
rectified at a qualified specialist workshop,
e.g. a Mercedes-Benz Service Centre.
If the newly inserted fuse also blows, have the
cause traced and rectified at a qualified spe-
cialist workshop, e.g. a Mercedes-Benz
Service Centre.
!
Only use fuses that have been approved
for Mercedes-Benz vehicles and which
have the correct fuse rating for the system
concerned. Otherwise, components or sys-
tems could be damaged.
The fuses are located in various fuse boxes:
R
fuse box on the driver's side of the dash-
board*
R
fuse box in the engine compartment on the
driver's side
R
fuse box in the stowage well under the lug-
gage compartment floor on the right-hand
side of the vehicle
Fuse allocation chart
The fuse allocation chart is located with the
vehicle tool kit (
Y
page 175) in the stowage
compartment under the luggage compart-
ment floor.
Before changing a fuse
X
Park the vehicle.
X
Switch off all electrical consumers.
X
Remove the key from the ignition lock.
Fuse box in the dashboard*
X
To open: open the driver’s door.
X
Pull out cover
:
slightly at the bottom
=
.
X
Pull cover
:
outwards and remove it
;
.
X
To close: clip in cover
:
at the front.
X
Fold cover
:
inwards until it engages.
X
Close the driver's door.
Fuse box in the engine compartment
X
Make sure that the windscreen wipers are
turned off.
G
Risk of injury
Make sure that the windscreen wipers are
turned off and the key is pulled out of the igni-
tion lock before you open the cover of the fuse
box. Otherwise, the windscreen wipers and
the wiper rods above the cover could be set
in motion. This could lead to you or others
being injured by the wiper rods.
X
To open: open the bonnet (
Y
page 146).
Fuses
239
Practi
cal
advic
e
* optional
X204_AKB; 1; 5, en-GB
wobuchh,
Version: 2.11.4
2008-10-15T13:20:56+02:00 - Seite 239
Z
Dateiname: 6515_0671_02_buchblock.pdf;
preflight
