The rear-compartment seat belt status indi-
cator appears in the multi-function display for
around 30 seconds if:
R
you set off and have reached a speed of
approximately 10 km/h.
R
the rear passengers fasten or unfasten
their seat belts while driving.
R
someone gets in or out of the vehicle.
You can also cancel the messages immedi-
ately (
Y
page 176).
The following messages appear in the multi-
function display:
Vehicles with multi-function steering wheel (4
buttons)
R
7
No rr.st.belt engaged
R
7
1 rr.st.belt engaged
R
7
2 rr.st.belts engaged
R
7
3 rr.st.belts engaged
Vehicles with a luxury multi-function steering
wheel* (12 buttons)
R
7
No rear seat belt engaged
R
7
1 rear seat belt engaged
R
7
2 rear seat belts engaged
R
7
3 rear seat belts engaged
i
The status indicator for the rear-compart-
ment seat belts is only available for certain
countries.
Correct driver's seat position
G
Risk of accident
Only adjust the driver's seat when the vehicle
is stationary. You will otherwise be distracted
from the road and traffic conditions and you
could lose control of the vehicle as a result of
the seat moving. This could cause an acci-
dent.
G
Risk of accident
Only adjust the steering wheel when the vehi-
cle is stationary and do not pull away until the
steering wheel adjustment mechanism is
locked in position. Otherwise, you might drive
without the steering wheel adjustment mech-
anism being locked in position and be distrac-
ted from road and traffic conditions by an
unexpected movement of the steering wheel
and cause an accident.
However, the steerability of the vehicle is not
affected.
X
Check whether seat
=
and the head
restraint are adjusted properly
(
Y
page 62).
Seat belts
73
Controls
* optional
X204_AKB; 1; 5, en-GB
wobuchh,
Version: 2.11.4
2008-10-15T13:20:56+02:00 - Seite 73
Z
Dateiname: 6515_0671_02_buchblock.pdf;
preflight
