Changing the front bulbs
Turn signal lamp
X
Switch off the lights.
X
Open the bonnet.
X
Push retaining lug
:
in the direction of the
arrow.
X
Pull covering
;
forward underneath cov-
ering
=
and remove.
X
Turn bulb holder
?
or
A
anti-clockwise
and pull it out.
X
WY 5 W: pull the bulb out of bulb
holder
?
.
X
PY 21 W: turn the bulb anti-clockwise,
applying slight pressure, and remove it
from bulb holder
A
.
X
WY 5 W: insert new bulb into bulb
holder
?
.
X
PY 21 W: insert the new bulb into bulb
holder
A
and turn clockwise while apply-
ing slight pressure.
X
Insert bulb holder
?
or
A
and turn it
clockwise.
X
Push covering
;
under covering
=
. Join
the two coverings using the tongue-and-
groove joint.
X
Press covering
;
until retaining lug
:
engages.
Changing the rear bulbs
Opening and closing the side trim pan-
els
You must open the side trim panel in the lug-
gage compartment before you can change
the bulbs in the tail lamps.
Left-hand side trim panel
Right-hand side trim panel
X
To open: turn catch
:
90° in the direction
of the arrow and remove side trim
panel
;
.
Changing bulbs
219
Prac
tic
al
advi
ce
X204_AKB; 1; 5, en-GB
wobuchh,
Version: 2.11.4
2008-10-15T13:20:56+02:00 - Seite 219
Z
Dateiname: 6515_0671_02_buchblock.pdf;
preflight
