X
Pull the light switch out to the second stop.
Yellow indicator lamp
R
next to the light
switch lights up.
X
To switch off: press the light switch in as
far as it will go.
The
R
yellow indicator lamp next to the
light switch goes out.
Combination switch (turn signals,
main-beam headlamps and headlamp
flasher)
Turn signal lamp
X
To switch on: press the combination
switch in the direction of arrow
;
or
?
.
The corresponding turn signal indicator
lamp
!
or
#
in the instrument clus-
ter flashes.
i
If you only wish to indicate a minor change
of direction, press the combination switch
briefly in the appropriate direction. The cor-
responding turn signal flashes three times.
Main-beam headlamps
X
Turn the ignition key to position 2 in the
ignition lock or start the engine.
X
Turn the light switch to
L
or
c
20
.
X
To switch on: press the combination
switch in the direction of arrow
:
.
The
K
indicator lamp in the instrument
cluster lights up.
X
To deactivate: move the combination
switch back to its normal position.
The
K
indicator lamp in the instrument
cluster goes out.
Headlamp flasher
X
To switch on: briefly pull the combination
switch in the direction of arrow
=
.
Hazard warning lamps
The hazard warning lamps still operate if the
ignition is switched off. They switch on auto-
matically if an airbag is deployed or if you
brake sharply and bring the vehicle to a halt
from a speed of more than 70 km/h.
X
To switch on: press button
:
.
All turn signals flash. If you now switch on
a turn signal using the combination switch
(
Y
page 76), only the turn signal lamp on
the corresponding side of the vehicle will
flash.
X
To switch off: press button
:
.
20
in the
c
position, the main-beam headlamps are only switched on when it is dark.
76
Lights
Controls
X204_AKB; 1; 5, en-GB
wobuchh,
Version: 2.11.4
2008-10-15T13:20:56+02:00 - Seite 76
Dateiname: 6515_0671_02_buchblock.pdf;
preflight
