X
To close: insert side trim panel
;
and turn
catch
:
90° in the opposite direction to
the arrow.
Changing the tail lamps
X
Switch off the lights.
X
Open the luggage compartment.
X
Open the side trim panel (
Y
page 219).
Bulb holder
X
Pull out connector
;
.
X
Press retaining lugs
:
simultaneously in
the direction of the arrow and pull the bulb
holder out.
Bulb holder without LED* turn signal lamp
:
Tail lamp/brake lamp
;
Turn signal lamp
=
Reversing lamp
?
Rear foglamp/tail lamp
X
Lightly press the corresponding bulb into
the holder, turn it anti-clockwise and
remove it from the bulb holder.
X
Insert the corresponding new bulb into the
bulb holder and turn it clockwise.
X
Attach the bulb holder and press firmly.
The retaining lugs on the bulb holder
engages audibly.
X
Insert the connector.
X
Close the side trim panel (
Y
page 219).
Changing the bulbs in the licence plate
lamps
X
Switch off the lights.
X
Open the tailgate.
X
Press lug
;
of license plate lamp
:
in the
direction of the arrow and remove license
plate lamp lens
:
.
X
Remove licence plate lamp lens
:
.
X
Replace the bulb.
X
Insert licence plate lamp lens
:
and press
it in until it engages.
Replacing the wiper blades
Windscreen wiper blades
G
Risk of accident
The windscreen will no longer be wiped prop-
erly if the wiper blades are worn. This could
prevent you from observing the traffic condi-
tions, thereby causing an accident. Replace
220
Replacing the wiper blades
Prac
tic
al
advi
ce
* optional
X204_AKB; 1; 5, en-GB
wobuchh,
Version: 2.11.4
2008-10-15T13:20:56+02:00 - Seite 220
Dateiname: 6515_0671_02_buchblock.pdf;
preflight
