X
Position jack
2
at jacking point
1
.
X
Make sure that the vehicle jack stands
upright and perfectly straight.
X
Take ratchet ring spanner
3
from the
vehicle tool kit and place it on the hexagon
nut of jack
2
so that the letters AUF are
visible.
X
Raise the vehicle with ratchet ring spanner
3
until the tyre is at most three centime-
tres off the ground.
X
Unscrew the wheel bolts.
!
Do not place wheel bolts in sand or on a
dirty surface. This could cause damage to
the bolt and wheel hub threads.
X
Remove the wheel.
Fitting a new wheel
G
Risk of accident
Replace damaged or corroded wheel bolts.
Never oil or grease wheel bolts. This could
cause the bolts to loosen in the wheel hub.
G
Risk of accident
If a wheel hub thread is damaged, you must
not drive the vehicle any further. Consult a
qualified specialist workshop which has the
necessary specialist knowledge and tools to
carry out the work required. Mercedes-Benz
recommends that you use a Mercedes-Benz
Service Centre or Service 24h for this pur-
pose. In particular, work relevant to safety or
on safety-related systems must be carried out
at a qualified specialist workshop.
G
Risk of accident
Only use wheel bolts that have been designed
for the wheel and the vehicle. For safety rea-
sons, Mercedes-Benz recommends that you
only use wheel bolts which have been
approved for Mercedes-Benz vehicles. Other
bolts could work loose.
Do not tighten the wheel bolts completely
while the vehicle is still jacked up. The vehicle
could topple off the jack.
1
Wheel bolts for 17", 19" and 20" wheels
2
Wheel bolts for the "Minispare" emer-
gency spare wheel*
X
Clean the wheel and wheel hub contact
surfaces.
Flat tyre
229
Practical
advice
* optional
X204_AKB; 1; 5, en-GB
wobuchh,
Version: 2.11.4
2008-10-15T13:20:56+02:00 - Seite 229
Z
Dateiname: 6515_0671_02_buchblock.pdf;
preflight
