Stowing the emergency spare wheel
X
Place the collapsible emergency spare wheel
into the emergency spare wheel bag and
close the emergency spare wheel bag.
X
Place the emergency spare wheel bag with
the collapsible emergency spare wheel into
the luggage compartment with the carrying
strap at the back.
X
Hook retaining spring hooks
:
of fastening
strap
;
into the lashing eyelets.
X
Tighten fastening strap
;
.
Inflating the collapsible emergency
spare wheel (Mercedes-AMG GLE 63)
!
Inflate the collapsible emergency spare
wheel using the tyre inflation compressor
before lowering the vehicle. The wheel rim
could otherwise be damaged.
!
Do not operate the tyre inflation compres-
sor for longer than eight minutes at a time
without a break. It may otherwise overheat.
The tyre inflation compressor can be oper-
ated again once it has cooled down.
Comply with the manufacturer's safety instruc-
tions on the tyre inflation compressor label and
on the tyre sealant bottle.
X
Mount the collapsible emergency spare wheel
as described (
Y
page 414).
The collapsible emergency spare wheel must
be mounted before it is inflated.
X
Remove the tyre inflation compressor from
the stowage space under the luggage com-
partment floor (
Y
page 387).
X
Pull connector
?
and hose
B
out of the
housing.
X
Remove the cap from the valve on the col-
lapsible emergency spare wheel.
X
Screw union nut
;
of hose
B
onto the valve.
X
Make sure on/off switch
A
of the tyre infla-
tion compressor is set to 0.
X
Insert connector
?
into a socket in your vehi-
cle.
Cigarette lighter socket: (
Y
page 364)
12 V sockets: (
Y
page 364)
Observe the notes on the cigarette lighter
(
Y
page 364). Observe the notes on sockets
(
Y
page 364).
X
Turn the key to position 1 in the ignition lock
(
Y
page 158).
X
Press on and off switch
A
on the tyre inflation
compressor to I.
The tyre inflation compressor is switched on.
The tyre is inflated. The tyre pressure is shown
on pressure gauge
=
.
X
Pump the tyre to the specified tyre pressure.
The specified tyre pressure is printed on the
yellow label of the emergency spare wheel.
X
When the specified tyre pressure has been
reached, press on and off switch
A
on the
electric air pump to 0.
The tyre inflation compressor is switched off.
X
Turn the key to position 0 in the ignition lock.
X
If the tyre pressure is higher than the speci-
fied pressure, press pressure release valve
button
:
until the correct tyre pressure has
been reached.
X
Unscrew union nut
;
on hose
B
from the
valve.
X
Screw the valve cap onto the collapsible
emergency spare wheel valve again.
X
Stow connector
?
and hose
B
in the lower
section of the tyre inflation compressor.
X
Stow the tyre inflation compressor in the vehi-
cle.
Emergency spare wheel
431
Whee
ls
and
tyres
Z
