Hybrid drive system
Display messages
Possible causes/consequences and
M
M
Solutions
d
Vehicle is opera‐
Vehicle is opera‐
tional Switch off
tional Switch off
the
the ignition
ignition before
before
exiting
exiting
PLUG-IN HYBRID vehicles:
You are exiting the vehicle when it is in a ready-to-drive state. The
READY indicator in the multifunction display is on. A warning tone also
sounds.
If you leave the vehicle:
X
Safeguard the vehicle against rolling away (
Y
page 191).
X
Switch off the ignition and remove the key.
If you do not leave the vehicle:
X
Switch off the electrical consumers, e.g. automatic climate control,
seat heating.
Please note the following: the electrical consumers are supplied by the
12 V battery. If the vehicle is left in a ready-to-drive state for an exten-
ded period, it will switch off once the 12 V battery is almost empty. It
will then only be possible to start the vehicle using a second battery
(jump-starting).
Change the current
Change the current
drive program
drive program
before
before changing
changing the
the
operating
operating
mode
mode
or
Exit manual
Exit manual
drive program M
drive program M
before
before changing
changing the
the
operating mode
operating mode
PLUG-IN HYBRID vehicles:
You have attempted to change the operating mode when in automatic
drive program Sport, Individual (with activated Sport characteristics)
or manual drive program M.
X
Select the Comfort, Slippery or Individual (with activated Comfort or
Eco characteristics) drive program (
Y
page 166).
X
Select the preferred operating mode HYBRID, E-MODE, E-SAVE or
CHARGE (
Y
page 262).
E-MODE currently
E-MODE currently
unavailable
unavailable
PLUG-IN HYBRID vehicles:
The charge level of the high-voltage battery has reached the lower limit
and the operating mode E-MODE has been switched off. Driving with
the internal combustion engine is activated and the operating mode
switches to the basic HYBRID setting.
X
Drive on using the internal combustion engine.
If necessary, you can change to the E-SAVE or CHARGE operating
mode (
Y
page 262).
If you select the CHARGE operating mode, the high-voltage battery
is charged.
When the charge level display of the high-voltage battery has risen
a little, you can change back to the E-MODE operating mode.
320
Display messages
On-bo
ard
computer
and
displays