door handle is held and the door is not
opened.
Notes on the automatic reversing feature for:
R
the side windows (
Y
page 98)
R
the sliding sunroof (
Y
page 102)
R
the panorama sliding sunroof (
Y
page 102)
Using the key
The key must be close to the vehicle. For vehi-
cles without KEYLESS-GO, the key must be near
the driver's door handle.
X
Vehicles without KEYLESS-GO: point the tip
of the key at the door handle on the driver's
door.
X
Press and hold the
&
button until the side
windows and the sliding sunroof or the pano-
rama sliding sunroof are fully closed.
X
Make sure that all the side windows and the
sliding sunroof or panorama sliding sunroof
are closed.
On vehicles with a panorama sliding sunroof:
X
Press and hold the
&
button again until the
roller sunblinds of the panorama sliding sun-
roof close.
X
To interrupt convenience closing: release
the
&
button.
Using KEYLESS-GO
X
Touch recessed sensor surface
:
on the
door handle until the side windows and the
sliding sunroof or the panorama sliding sun-
roof are fully closed.
i
Make sure you only touch recessed sensor
surface
:
.
X
Make sure that all the side windows and the
sliding sunroof or panorama sliding sunroof
are closed.
X
Vehicles with a panorama sliding sunroof:
touch recessed sensor surface
:
on the door
handle again until the roller sunblinds of the
panorama sliding sunroof close.
X
To interrupt convenience closing: release
recessed sensor surface
:
on the door han-
dle.
Resetting the side windows
If a side window can no longer be closed fully,
you must reset it.
X
Close all doors.
X
Turn the key to position 1 or 2 in the ignition
lock.
X
Pull the corresponding switch on the door
control panel until the side window is com-
pletely closed (
Y
page 98).
X
Hold the switch for an additional second.
If the side window opens again slightly:
X
Immediately pull the corresponding switch on
the door control panel until the side window is
completely closed (
Y
page 98).
X
Hold the switch for an additional second.
X
If the corresponding side window remains
closed after the button has been released, the
side window has been reset correctly. If this is
not the case, repeat the steps above again.
100
Side windows
Opening
and
closi
ng