Top view with image from the camera in
the exterior mirrors
:
Symbol for setting the top view with image
from the forward camera in the exterior mir-
rors
;
Yellow guide line for the vehicle width
including the exterior mirror (right side of
vehicle)
=
Yellow guide line for the vehicle width
including the exterior mirror (left side of
vehicle)
i
You can also select the camera setting in the
exterior mirrors for the rear-facing view.
Top view with trailer view
:
Symbol for the trailer view setting
;
Trailer drawbar locating aid
=
Ball coupling
?
Red guide line at a distance of approximately
0.30 m from the ball coupling
The lines are shown at the level of the trailer
coupling.
i
For technical reasons, the ball coupling of
the trailer tow hitch is only partially visible in
the multimedia system display.
180° view
:
Symbol for the full-screen setting with the
reversing camera image
;
Own vehicle
=
PARKTRONIC warning displays
i
180° view can also be selected as front
view.
Select this view when you are driving out of an
exit and the view of crossing traffic is restricted,
for example.
Stopping the 360° camera display
The 360° camera display is stopped:
R
when you select transmission position P, or
R
when you are driving at moderate speeds
The previous display appears in the multimedia
system. You can also switch the display by
selecting the
&
symbol in the display and
pressing the controller to confirm.
ATTENTION ASSIST
General notes
ATTENTION ASSIST helps you during long,
monotonous journeys such as on motorways
and trunk roads. It is active in the 60 km/h to
200 km/h speed range. If ATTENTION ASSIST
detects typical indicators of fatigue or increas-
ing lapses in concentration on the part of the
driver, it suggests taking a break.
Important safety notes
ATTENTION ASSIST is only an aid. It may not
always detect fatigue or lapses in concentration
until too late, or may not detect them at all. The
240
Driving systems
Dr
ivi
ng
an
d
parki
ng
