Mercedes-Benz EQS 350, Руководство оператора

Страница: 213 / 581

Engaging neutral N
#
Depress the brake pedal and push the DIRECT
SELECT lever up or down to the first point of
resistance, holding it there until the transmis-
sion position
i
is shown on the driver's dis-
play.
Subsequently releasing the brake pedal will allow
you to move the vehicle freely, e.g. to push it or
tow it away.
If you want the transmission to remain in neutral
N even if the vehicle is switched off:
#
Start the vehicle.
#
Depress the brake pedal and engage neutral
i
.
#
Release the brake pedal.
#
Switch off the vehicle.
%
If you then exit the vehicle leaving the key in
the vehicle, the transmission will remain in
neutral
i
.
Engaging park position P
*
NOTE Damage due to engaging park posi-
tion
j
while the vehicle is rolling
If you shift the transmission into park position
j
while the vehicle is rolling, the transmis-
sion may be damaged.
#
If the vehicle is rolling, do not open a
door.
#
Only engage the park position
j
when
the vehicle is stationary.
#
Observe the notes on parking the vehicle
(
/
page 230).
#
Depress the brake pedal until the vehicle
comes to a standstill.
#
When the vehicle is stationary, press button
j
.
When the transmission position display shows
j
, the park position is engaged. If the trans-
mission position display
j
does not appear,
set the parking brake and secure the vehicle
to prevent it from rolling away.
%
Depending on the situation, it may take a
short time until
j
is engaged. Therefore,
always pay attention to the transmission posi-
tion display.
Park position
j
is engaged automatically if one
of the following conditions is met:
R
You switch the stationary vehicle off in trans-
mission position
h
or
k
.
R
You open the driver's door when the vehicle is
stationary in transmission position
h
or
k
.
R
When the vehicle is rolling, you switch if off in
transmission position
h
or
k
and bring it to
a standstill.
R
You switch off the engine, bring the vehicle to
a standstill and open the driver's door when
the vehicle is stationary or when the vehicle is
rolling and the transmission position is
i
.
R
Engaging park position
j
automatically is
required by the vehicle.
%
Park position
j
can be engaged automati-
cally when the vehicle is rolling very slowly.
210 Driving and parking