Comply with the manufacturer's safety notes on
the sticker on the tyre inflation compressor.
Have the tyre sealant bottle replaced in a qualified
specialist workshop every five years.
#
Do not remove any foreign objects which have
entered the tyre.
#
Affix part
1
of the TIREFIT sticker to the
instrument cluster within the driver's field of
vision.
#
Affix part
2
of the TIREFIT sticker near the
valve on the wheel with the defective tyre.
#
Pull plug
4
with the cable and hose
5
out
of the tyre inflation compressor housing.
#
Push the plug of hose
5
into flange
6
of
tyre sealant bottle
1
until the plug engages.
#
Place tyre sealant bottle
1
head downwards
into recess
2
of the tyre inflation compres-
sor.
#
Remove the valve cap from valve
7
on the
faulty tyre.
#
Screw filling hose
8
onto valve
7
.
#
Insert plug
4
into a 12‑V‑socket in your vehi-
cle(
/
page 151).
#
Switch on the vehicle.
#
Switch on the tyre inflation compressor using
On/Off switch
3
.
The tyre is inflated. First, tyre sealant is pum-
ped into the tyre. The pressure may briefly rise
to approximately 500 kPa (5.0 bar/73 psi).
Do not switch off the tyre inflation compressor
during this phase!
416 Breakdown assistance
Содержание EQS 350
