Mercedes-Benz EQS 350, Руководство оператора

Страница: 408 / 581

Information on using a high-pressure cleaner
&
WARNING Risk of an accident when using
high-pressure cleaners with round-spray
nozzles
The water jet can cause externally invisible
damage.
Components damaged in this way may unex-
pectedly fail.
#
Do not use a high-pressure cleaner with
round-spray nozzles.
#
Have damaged tyres or chassis parts
replaced immediately.
To avoid damage to your vehicle, observe the fol-
lowing when using a high-pressure cleaner:
R
The key is at a minimum distance of 3 m away
from the vehicle. Otherwise the tailgate or a
door could open unintentionally.
R
Maintain a distance of at least 30 cm to the
vehicle.
R
Vehicles with decorative foil: Parts of your
vehicle are covered with a decorative foil.
Maintain a distance of at least 70 cm between
the foil-covered parts of the vehicle and the
nozzle of the high-pressure cleaner. Move the
high-pressure cleaner nozzle around whilst
cleaning. The water temperature of the high-
pressure cleaner must not exceed 60°C.
R
Observe the information on the correct dis-
tance in the equipment manufacturer's opera-
tor manual.
R
Do not direct the nozzle of the high-pressure
cleaner directly at sensitive parts, e.g. tyres,
gaps, electrical component parts, batteries,
illuminants and louvres.
Washing the vehicle by hand
Observe the relevant legal requirements (e.g. in
some countries, washing by hand is permitted
only in specially designated wash bays).
#
Use a mild cleaning agent (e.g. car shampoo).
#
Wash the vehicle with lukewarm water using a
soft car sponge. When doing so, do not
expose the vehicle to direct sunlight.
#
Carefully hose the vehicle off with water and
dry using a chamois.
% Observe the notes on the care of car parts
(
/
page 407).
Notes on paintwork/matt finish paintwork care
To avoid damaging the paintwork and interfering
with the driving assistance systems, please
observe the following notes:
Paint
R
Insect remains: Soak with insect remover and
rinse off the treated areas afterwards.
R
Bird droppings: Soak with water and rinse off
afterwards.
R
Tree resin, oils, fuels and greases: remove by
rubbing gently with a cloth soaked in petro-
leum ether or lighter fluid.
R
Coolant and brake fluid: remove with a damp
cloth and clean water.
R
Tar stains: use tar remover.
R
Wax: use silicone remover.
Maintenance and care 405