If the driver display shows a warning, a service
area search is offered in the multimedia system.
You can select a rest area and start navigation to
this rest area.
If you restart the vehicle, ATTENTION ASSIST with
microsleep detection is automatically activated.
The last selected sensitivity level remains stored.
System limits
ATTENTION ASSIST is active in the 60 km/h to
200 km/h speed range.
The microsleep detection function is available at a
speed of 20 km/h and above.
Particularly in the following situations, ATTENTION
ASSIST only functions in a restricted manner and
warnings may be delayed or not occur:
R
If you have been driving for less than approx-
imately 30 minutes.
R
If the road condition is poor (uneven road sur-
face or potholes).
R
If there is a strong side wind.
R
If you adopt a sporty driving style (high corner-
ing speeds or high rates of acceleration).
R
If the Steering Assist function of Active Dis-
tance Assist DISTRONIC is active.
R
If the clock is set to the incorrect time.
R
If you change lanes and vary your speed fre-
quently in active driving situations.
Microsleep detection also does not function when
the driver camera cannot detect the driver's eyes,
forexample as a result of the following factors:
R
The driver's eyes are covered due to the steer-
ing column position, forexample.
R
Poor lighting conditions.
R
Some types of spectacles or sunglasses.
R
The driver's line of vision is outside the driver
camera's field of vision.
Also observe any information regarding display
messages that can be displayed in the driver's
display.
The tiredness and alertness assessment of
ATTENTION ASSIST with microsleep detection is
reset and restarted when continuing the journey
in the following situations:
R
If you switch off the vehicle.
R
If you unfasten your seat belt and open the
driver's door (e.g. to change drivers or take a
break).
Multimedia system:
4
©
5
Settings
5
Assistance
5
Assistance
5
ATTENTION ASSIST
Setting the sensitivity
#
Select
Z
next to
ATTENTION ASSIST
.
#
Select
Standard
or
Sensitive
.
Activating/deactivating the microsleep warning
#
Activate or deactivate
Microsleep warning
.
Cruise control regulates the speed to the value
selected by the driver.
If you accelerate to overtake, forexample, the
stored speed is not deleted. If you remove your
foot from the accelerator pedal after overtaking,
Driving and parking 247
Содержание EQS 350
