Mercedes-Benz EQS 350, Руководство оператора

Страница: 228 / 581

Combo 1 vehicle socket Combo 2 vehicle socket
#
Open socket flap 1 via the EQ module of the
multimedia system (
/
page 332).
or
#
Press the centre rear section of socket flap
1 .
Socket flap 1 swings open and status display
2 lights up white.
Vehicles with an electrical socket flap: if an obsta-
cle impedes the socket flap while it is opening,
the socket flap will close again automatically.
%
When the vehicle is started (the
õ
display
is lit in the driver's display), socket flap
1
cannot be opened.
#
Remove socket cover 4 from the lower con-
nection of vehicle socket 3 .
% The CCS charging cable connector requires
both vehicle socket connections 3 .
#
Insert the charging cable connector into vehi-
cle socket 3 to the stop.
Make sure that the charging cable is not taut
when inserted.
Status display
2 flashes orange and, as soon
as the high-voltage battery is charged, blue.
% When the charging sequence for the ambient
lighting is activated, the ambient lighting lights
up for approximately 30 seconds as with sta-
tus display 2 (
/
page 169).
Driving and parking 225