Mercedes-Benz EQS 350, Руководство оператора

Страница: 173 / 581

Adjusting the brightness
#
Select Brightness .
#
Adjust the brightness.
% Depending on the ambient light conditions,
the ambient lighting will automatically switch
between day and night modes.
Activating the brightness for zones
#
Select Brightness .
#
Switch off Link zones .
The Direct , Indirect and Accents zones can be
set separately.
%
The Light strip zone can also be set in vehi-
cles with active ambient lighting.
Activating effects
&
WARNING Risk of an accident despite
activated effects of ambient lighting and
active ambient lighting
To use the Warning Assistance effects, the
respective functions must be activated in the
driver assist menu.
#
Make sure that the functions and assists
are switched on.
%
Observe the notes on driving systems and
your responsibility; you may otherwise fail to
recognise dangers (
/
page 237).
#
Select
Effects
.
#
Activate the desired effect.
%
Depending on the vehicle equipment, different
effects are available.
Operating feedback effects
R
Climate : If changes are made to the tempera-
ture setting in the vehicle, the colour of the
ambient lighting will change briefly.
R
Voice assistant
: For vehicles with active ambi-
ent lighting, the voice assistant is visually ani-
mated.
R
Interior/exterior lighting : When you get into
the vehicle, a special colour animation will
play.
R
Charging sequence : The ambient lighting pro-
vides visual feedback on the different states of
charge when the vehicle is connected to or
disconnected from the charging station.
Warning assistance effects
R
Warning when exiting : If an object is detected
in the blind spot while you are getting out of
the vehicle, the ambient lighting in the affec-
ted door will flash red.
Further information on the exit warning
(
/
page 276).
R
Active Lane Keeping Assist : If there is a warn-
ing from Active Lane Keeping Assist, the
active ambient lighting will flash red.
Further information on Active Lane Keeping
Assist (
/
page 279).
R
Active Brake Assist : If there is an Active Brake
Assist warning, the active ambient lighting in
the centre of the cockpit will flash bright red.
Further information on the Active Brake Assist
(
/
page 265).
R
Active Blind Spot Assist : In vehicles with
active ambient lighting, the ambient lighting
on the affected side will flash red if there is a
warning from Active Blind Spot Assist.
170 Light and sight