Mercedes-Benz 3W72M2, Руководство по установке

Страница: 16 / 32

12
The internal check routine is indicated by the LEDs on the front of the Mercedes-Benz Wallbox as follows.
LED display Description
All three LEDs flash once …
... and then go out.
Then, the blue LED (ancillary version) and the green LED (main version)
flash to indicate the current version of the firmware (only relevant for error detec-
tion).
On completion the blue LED flashes every 5 seconds, the green LED and the red LED go out. The vehicle can now
be connected for charging. The charging procedure itself is described in the operating manual included.
PLEASE NOTE!
To complete electrical installation, the protective devices of the wallbox must be checked in testing mode for correct func-
tioning. Testing mode is described in section “Setup and testing modes” on page 16 and following.