Mercedes-Benz 3W72M2, Руководство по установке

Страница: 8 / 32

4
Notes regarding installation
Please observe the following instructions for the installation of your Mercedes-Benz Wallbox:
•
The device must always be connected to the protective earth conductor of your electricity supply. The protective earth con-
nection will be made and checked by the installing contractor. After installation, only specialist electrical contractors may
make changes. At all times comply with local safety regulations for the country in which you operate the wallbox.
•
For proper operation, the power supply for the wallbox must be protected in the domestic power supply with suitable
MCB(s) and RCCB.
•
To disconnect the wallbox completely from the electricity grid, the power supply must be interrupted using the upstream
MCB(s) and RCCB.
•
Ensure that the rated voltage and rated current of the device comply with the parameters of your local electricity grid and
that the rated output is not exceeded during the charging procedure.
•
The wallbox should not be installed in areas of high pedestrian traffic. Installation along thoroughfares and marked escape
routes should be especially avoided.
•
Never install the wallbox in a confined space. In particular, you must ensure that the vehicle can be parked at a suitable dis-
tance from the wallbox for charging and connected without any strain on the charging cable. The distance between vehicle
and wallbox should be at least 50 cm and no more than 5 m. You may deviate from this recommendation depending on the
model variant of the wallbox (length of charging cable) and local conditions.
•
You must not under any circumstances make any changes to the housing or the internal wiring of the wallbox: Any disre-
gard of this instruction represents a safety risk, fundamentally breaches the guarantee provisions and may void the war-
ranty with immediate effect.