26
03/2021
Operation and control
Loading the appliance
When loading the appliance with an unsuitable load, poisonous or explosive vapours
or gases may be produced. This could cause the appliance to explode, and persons
could be severely injured or poisoned. The appliance may only be loaded with ma-
terials which do not form any toxic or explosive vapours when heated up, and which
cannot ignite. If there is any doubt as to the composition of materials, they must not
be loaded into the appliance.
Check the chamber load for chemical compatibility with the materials of the appliance.
Insert the sliding steel grids or sliding shelves. The maximum number or grids / shelves
and the load capacity are speci
fi
ed in the technical data overview in chapter 7.3.5 . To
achieve optimal temperature distribution, the type of slide-in unit used – steel grid or
shelf – must be set in the menu under SETUP.
The chamber must not be loaded too tightly, so that proper air circulation in the interior
is guaranteed.
Do not place any load on the
fl
oor, on the side walls or under the ceiling of the interior
In case of improper loading (not enough space between the items), the set temperature
may be exceeded or it may take longer until it is reached.
(see also the “correct loading” sticker on the appliance).
WARNING
