21
03/2021
Delivery, Transport and Setting Up
3.10 Tilt
protection
Attach the appliance to a wall with the tilt protection. The tilt protection is included in
the scope of delivery.
1. Tighten the tilt protection onto the back of the appliance as illustrated.
i
Depending on the ambient conditions, the tilt protection can be fastened to either
of the two holes in the appliance.
15 cm
2. Bend the tilt protection upwards by 90° in the desired distance to the wall (ob-
serve the minimum distance to the wall).
3. Drill a hole, insert a dowel and screw the tilt protection to a suitable wall.
3.11 Adjusting
doors
You can adjust the doors if necessary, for example if they are warped due to uneven
fl
ooring. There are two adjusting screws each at the top and the bottom of each door for
this purpose. First, adjust the setting at the top of the door and, if this is not suf
fi
cient,
adjust the screws at the bottom of the door.
Door adjustment is also available as a service video:
https://www.memmert.com/de/downloads/media/service-videos/
1. Open the door.
2. Loosen the screws.
3. Adjust the position of the door.
4. Tighten the screws again.
5. Check the position of the door.
6. Readjust if required.
i
