Memak Rota 507, Инструкция по установке и эксплуатации

Страница: 32 / 48

32
I
memak.com
TRAY TROLLEY 80X100 74X104 60X90 60X80
WIDTH ( A )
mm / inç
850/33,4 800/31,5 610/24 650/25,6
DEPTH ( B )
mm / inç
925/36,4 942/37,01 825/32,4 730/28,7
HEIGHT ( C )
mm / inç
1780/70,07 1780/70,07 1780/70,07 1540/70,07
Tray trolley being the oven equipment, number of shelves compatible with various food may differ
according to the sales contract.
PERSONNEL PROTECTIVE EQUIPMENT
Operator must wear a heat resistant glove when the trays taken out from the oven and
the hot trays are moved. Operator should never wear plenty of clothes or ties. It is
obligatory to put on hair protector (bonnet).
Operator must maintain the distance between the oven and himself during the control
of the cooking process and not lean against the oven and in particular the cover glass.
While the oven is running, steam is discharged from the flue system at temperatures
of 80 - 100 C°. So, never touch these parts. Special warning signs should be attached
to these areas. Operator should use shovel and wear protective gloves when taking
out products from the oven. After the products are removed, the parts inside the oven
should not be touched. For cleaning and maintenance of the machine, allow the oven
to cool down to a sufficient temperature. Operator must open the aspirator and the
steam relief valve before taking out the cooked hot products from the oven. This allows
the steam in the cooking chamber to be evacuated from the oven in just a second. If
the aspirator is not running (the machine is switched off or broken), operator should
manually open the drain valve and should wait 3-4 minutes for steam discharge and
should take the product out thereafter.
This symbol means that the furnace may have a voltage supply inside the electrical
panel. Before opening the electricity panel, it is necessary to cut electricity from main
witch or by directly pulling out the socket from the plug (For maintenance personnel).
In case of any gas leakage or gas accumulation, the emergency stop must be pressed;
flammable products if any should be removed, all doors and windows should be opened
and should be contacted to the manufacturer. Open the door with care. This signal
alerts the operator to the risk of sudden vapor output which cannot be released by the
aspirator when the door is opened. If the aspirator does not work due to a power failure,
it should be treated more carefully.
Do not remove or damage warning sign.
• It is mandatory to replace damaged and illegible warning signs. Please contact with the
manufacturer for new warning signs.
• Manufacturer is not liable for work accidents or damage to the machine resulting from failure to
observe the safety and warning signs or the removal of these plates from the machine.