Memak Rota 507, Инструкция по установке и эксплуатации

Страница: 15 / 48

INSTALLATION AND USER MANUAL FOR BAKERY OVEN WITH ROTATING TROLLEY
I
15
Load Structure
Machine can be shipped in form as stated below:
•
Completely assembled;
• Partially assembled;
• Not completely assembled; parts are stacked on the pallet or optionally on top of any wooden
structure.
The vehicle to be transported must have the required lifting capacity. (Please see machine’s technical
information chart.). Furthermore, vehicle’s minimum loading areas should be as follows. (Width: 2300
mm; Length: 5000 mm)
Lifting device used to raise the machine; should have sufficient lifting capacity and fork length.
Product Transport
General Rules on Lifting and Transporting the Machine
• Before starting the operation, designate and inspect the entire transport area, the parking area of
the vehicle carrying the transport and the area where the machine will be installed. Ensure there
is no hazardous situation.
• Make sure that the vehicle to carry out the machine’s lifting and transport procedure of the
machine has sufficient lifting capacity. Weights are stamped on the packaging and / or are
available in this manual.
• Check that the hoisting ropes and chain types are approved and that the capacity instructed by
the manufacturer is clearly written on the ropes. Check whether there is a damage and corrosion
with the lifting ropes before use.
• Do not knot or twist the lifting ropes and follow the rules written in this manual by the
manufacturer. Same rules apply to chains and belts.
• Particular attention should be paid for lifting the machine centrally.
• Do not climb over and pass under when the machine is loaded and moving.
•
Care must be paid that unauthorized personnel are not in the loading area.
• In order not to cause any accident and injuries; all operators must stand at a safe distance when
lifting the machine.
• Special care must be paid to keep the system stable when realizing machine lifting procedure.