Meler B4 NON-STOP, Инструкция по эксплуатации

Страница: 55 / 78

5-1
MAINTENANCE MA-5081-E B4 NS ADHESIVE MELTER MANUAL
5. MAINTENANCE
Warning : The melter equipment is equipped with current technology, but
has certain foreseeable risks. Therefore, only allow qualified personnel with
enough training and experience to operate install or repair this equipment.
The following table briefly summarizes the indications for adequate melter
equipment maintenance. Always read the corresponding section carefully.
If the equipment does not work or works incorrectly, called to your Meler
Technical Assistance Service or to the Main Office.
External cleaning
To continue to take advantage of the melters benefits and to ensure the
perfect mobility of its components, it is necessary to keep all its parts clean,
especially the ventilation grates on the of the machine.
Warning: Risk of electric shock. Carelessness may result in injury or death.
Clean the exterior using a cloth moistened with water. Do not use flammable
liquids or solvents.
External cleaning:
• Use cleaning products compatible with painted surfaces.
• Apply the cleaning product with a soft cloth.
• Do not use sharp tools or scrapers with sharp edges.
Operation Frecuency Refer to
External cleaning Daily Equipment cleaning
Despresurización del sistema
Before performing maintenance tasks and
repairing the hydraulic system
Depressurizing the system
Emptying and cleaning the
tank
- When burnt adhesive is present
- With each adhesive change
Tank cleaning
Filter cleaning or changing
- As needed (once a year minimum)
- With each adhesive change
Filter maintenance
Check for pump leaks
Depending on the hours of operation and the temperature
and speed parameters(min. once per month)
Pump maintenance
Check the lubrication (motor
and gear)
Depending on the temperature and conditions of
use (max. 8000 hours)
Motor gear maintenance
Check thermostat operating - Checking while working Safety thermostat
Equipment change - Equipment change or repair Dettaching equipment from base