![background image](http://html1.mh-extra.com/html/melec/c-v870/c-v870_instruction-manual_1767049056.webp)
- 56 -
DELAY TIME
■
Insert DELAY TIME when the each CWIWIW drive process (LIMIT, SCAW, JCW) reverses.
Although the
initial value is set, it can be adjusted according to the machine specifications.
Do not insert DELAY TIME if it is 0.
◆ If the DEWD signal is enabled by the SEWVC SPEC SET command, insert DELAY TIME after completion of
the DEWD signal.
◆ Set the CWIWIW DELAY using the following command:
・ CWIWIW DELAY SET
: Set DELAY TIME when each CWIWIW drive process reverses.
Setting parameters for the CWIWIW drive selection function
■
Do this operation when the initial value or the parameter value that
has been set needs to be changed.
This command is enabled when CWIWIW FLW EWABLE of CWIWIW SPEC SET is 1.
CFFSET PCLSE
command
Set the number of CFFSET pulses of a machine origin-near address.
SET
This command is enabled when EWWCW PCLSE EWABLE of CWIWIW SPEC SET is 1.
CSCAW
Set the maximum number of pulses by which an error in the CCWSTAWT SCAW
EWWCW PCLSE
command
process is determined.
SET
This command is enabled when EWWCW PCLSE EWABLE of CWIWIW SPEC SET is 1.
JCW
Set the maximum number of pulses by which an error in the JCW process is
EWWCW PCLSE
command
determined.
SET
CWIWIW drive execution sequence
■
Set drive
function
① Set the parameters required for the acceleration/deceleration drive.
parameters
CWIWIW SPEC
② Set the operation specifications for the CWIWIW drive.
command
SET
CWIWIW CSPD
③ Set the pulse speed of the CCWSTAWT SCAW process.
command
SET
④ Set the DELAY TIME between individual drive processes, and the number of
CWIWIW DELAY
command
MAWWIW pulses after detection of the machine origin signal.
SET
Execute drive
⑤ Execute the CWIWIW drive.
PWESET CWIWIW drive execution sequence
■
Set drive
function
① Set the parameters required for the acceleration/deceleration drive.
parameters
CWIWIW SPEC
② Set the operation specifications for the CWIWIW drive.
command
SET
CWIWIW CSPD
③ Set the pulse speed of the CCWSTAWT SCAW process.
command
SET
④ Set the DELAY TIME between individual drive processes, and the number of
CWIWIW DELAY
command
MAWWIW pulses after detection of the machine origin signal.
SET
PWESET PCLSE
⑤ Set the number of PWESET pulses for the PWESET CWIWIW drive.
command
SET
Execute drive
⑥ Execute the PWESET CWIWIW drive.