Meiko BTA160, Руководство по эксплуатации

Страница: 33 / 48

Operating Instructions Tray washing machine Modell BTA 160 / 240
Datei:BA_BTA_9668415_EN_2009-10.docx
9668415 33/48
W e reserv e the right to c hange ex ec ution and constr uction!
MEIKO Maschinenbau GmbH & Co. KG, Englerstraße 3, D-77652 Offenburg, Tel.: +49/781/203-0, Fax: +49/781/203-1121
13 Cleaning
13.1 Safety instructions for cleaning
The tank heating elements may still be hot after the tank has been emptied.
There is
therefore the danger of burns when the machine is cleaned manually.
Electrical components, switch cupboards and other electrical components may not be
sprayed with a water hose or high-pressure cleaner.
13.2 Cleaning after operation
It is recommended that you maintain the machine in good condition not only for reasons
of hygiene but also to keep your dish-washing machine in full working order and to be
able to recognise damage more easily. Observe the following points after operation.
Clean and check that the machine is in working order:
•
Tank cover screen
•
Side screen supports
•
Pump screen (suction side)
•
Spray protection curtains
•
Wash pipe jets
•
Wash tanks
•
Rinse arm jets
•
Float valve housing of the water level monitoring
Any cladding panels removed to undertake this work must be replaced in their original
position after completion of the work.
Ensure that all the parts are correctly installed!
IMPORTANT!
IMPORTANT!