Operating Instructions Tray washing machine Modell BTA 160 / 240
Datei:BA_BTA_9668415_EN_2009-10.docx
9668415
16/48
W e reserv e the right to c hange ex ec ution and constr uction!
MEIKO Maschinenbau GmbH & Co. KG, Englerstraße 3, D-77652 Offenburg, Tel.: +49/781/203-0, Fax: +49/781/203-1121
When all the fasteners on the transport packing have been removed,
the appliance is again lifted on both sides with the peveryt truck.
All the large bearers running along the length of the appliance can now be easily
withdrawn.
The appliance is next lowered onto the floor and the pallet trucks removed.
You must
take great care to ensure that the appliance is not jolted when it is lowered
otherwise the foot cleats could be damaged beyond repair.
Please also ensure that the cleats are extended uniformly so that one set of cleats is not
loaded more than the others. You can check the loading by means of the force needed to
turn the cleats with a spanner.
An open-ended 27 mm spanner is
needed to adjust the cleats of the
appliance!
If it is necessary to move the appliance along a wall, the appliance can be pushed along
the wall on its cleats for a limited distance.
(Be careful of gratings in the floor and changes in height!)
The appliance can also be easily moved flush to the wall by leaving the small longitudinal
bearers under the appliance and moving the appliance backwards as shown in the
picture.
Position the pallet truck close to the frame.
Push the small
longitudinal bearers
to the left and right
of the frame.
Содержание BTA160
Страница 48: ......
