Operating Instructions Tray washing machine Modell BTA 160 / 240
Datei:BA_BTA_9668415_EN_2009-10.docx
9668415
35/48
W e reserv e the right to c hange ex ec ution and constr uction!
MEIKO Maschinenbau GmbH & Co. KG, Englerstraße 3, D-77652 Offenburg, Tel.: +49/781/203-0, Fax: +49/781/203-1121
13.4 Care of stainless steel surfaces
We recommend cleaning the stainless steel surfaces only when needed with cleaner and
care products suitable for stainless steel.
Lightly soiled parts can be wiped with a (possibly damp) cloth or sponge.
Be sure to wipe dry after cleaning to avoid traces of scale. Use demineralised water if
possible.
Do not use aggressive cleaning or scouring agents.
The care products must not attack the stainless steel, form deposits, or cause
discoloration.
Never use cleaning agents that contain hydrochloric acid or bleaches based on chlorine.
Never use cleaning equipment that you have used previously by non-stainless steel to
avoid external corrosion.
Aggressive external influences due to cleaning and care products that evaporate in the
vicinity of the dish-washing machine, or caused by direct application, can lead to machine
damage and put the material at risk (e.g., aggressive tile cleaners).
Caution!
Respect the safety rules of the manufacturers on the original packing as well as on the
safety data sheets.
13.5 Cleaning after operation
After cleaning the machine ensure that
all parts have been replaced correctly.
Check that the following
parts are present and in the correct position:
•
Side screen supports
•
Tank cover screen
•
Outlet stand-pipe
•
Rinse pipes
•
Pump rinse pipes
•
Curtains
•
Check that the correct number of wash pipe end caps is present
•
Pump suction side sieve
Close the outlet valve.
The dish-washer is now ready for the next shift.
Содержание BTA160
Страница 48: ......
